| Step# |
Location |
Description |
Initials |
Date |
| 10 |
Instructor |
Use stock from the layout Drill & Tap Gage Project. |
| 20 |
Belt sander and/or File |
File the second end to obtain length
specifications. (The first end was done in layout.) |
|
| 20 |
Belt sander |
Belt sand excess stock from corners, leaving about
1/32 inch for filing. Be careful not to over heat the work,
destroying the layout lines. |
| 30 |
Machine Shop |
File the corner radii to the layout lines.
Use the correct radius gage to check all four corners. |
| 40 |
Machine Shop |
Draw file all of the sides and radii to a smooth
scratch-free surface. |
| 50 |
Machine Shop |
Deburr and inspect. |
| 60 |
Machine Shop |
Have the part inspected by your instructor. |
* |
|
