Machine Shop 1 - Inspection - Dial Indicators

Machine Shop 1
Inspection - Dial Indicators - Project 1
Back to the Projects

Inspection - Project 1-1 - Dial Indicators

Part # PS1#1
Part Description: Dial Indicators & Vernier Height Gage
Quantity Req.: 1
PLEASE HAVE INSTRUCTOR INITIAL AND DATE GREY BOXES (*), AFTER REQUIRED OPERATIONS

Step# Location Description Instructor
Initials Date

10 Instructor Obtain a set of parts marked 3-C-1.

20 Inspection Area Select a Vernier Height gage Select a Dial Test Indicator

30 Inspection area on a surface plate Have instructor check your setup using the dial indicator and vernier height gage. *

30 Inspection area on a surface plate Determine the dimension indicated on the drawing to the nearest 0.001(+/- .005) and record your answer in the space provided.

Dial Indicators: Project 1-1 Online Submission
Submit your answers to the questions below to your instructor online by clicking the submit button below
or Print the sheet and give to your instructor.

Name:

Date:

Grading Summary

+/- .001" = OK
+/- .002" = - 1
+/- .003" = - 2
+/- .004" = - 4
+/- .005" = - 8 +/- .006" = or Worse = Do Over

Identify these parts

Part A

Part B

Part C

Part D

Step#	Location	Description	Instructor Initials	Date
10	Instructor	Obtain a set of parts marked 3-C-1.
20	Inspection Area	Select a Vernier Height gage Select a Dial Test Indicator
30	Inspection area on a surface plate	Have instructor check your setup using the dial indicator and vernier height gage.	*
30	Inspection area on a surface plate	Determine the dimension indicated on the drawing to the nearest 0.001(+/- .005) and record your answer in the space provided.