Machine Shop 1 - Inspection - Indirect Measurement

Machine Shop 1
Inspection - Indirect Measurement - Project 1
Back to the Projects

Inspection - Project 1-1 - Indirect Measurement

Part # PS1#1
Part Description: Indirect Measurement
Quantity Req.: 1

Step# Location Description

10 Instructor Obtain a set of parts marked 3-D-1.

20 Tool cabinet Select a steel rule, spring calipers, small hole gages, adjustable parallels, and telescoping gages.

30 Inspection area or classroom Using spring calipers, measure the OD and ID of the parts numbered 1 through 5 to the nearest 1/64 of an inch (+/- 1/64) and record your answer in the space provided.

40 Inspection area or classroom Using small hole gages, measure the parts numbered 6 through 10 to the nearest 0.001 of an inch (+/- 0.005) and record your answer in the space provided.

50 Inspection area or classroom Using telescoping gages, measure the parts numbered 11 through 15 to the nearest 0.001 of an inch (+/- 0.005) and record your answer in the space provided.

60 Inspection area or classroom Using adjustable parallels, measure the width of the slots in part 16 to the nearest 0.001 of an inch (+/- 0.005) and record your answers in the space provided.

Indirect Measurement: Project 1-1 Online Submission
Submit your answers to the questions below to your instructor online by clicking the submit button below
or Print the sheet and give to your instructor.

Name:

Date:

Grading Summary

-1 = 96%
-2 = 92%
-3 = 88%

Identify the measurement for the following:
4 points per answer

Spring Calipers

1. Outside Diameter 4. Outside Diameter

1. Inside Diameter 4. Inside Diameter

2. Outside Diameter 5. Outside Diameter

2. Inside Diameter 5. Inside Diameter

3. Outside Diameter

3. Inside Diameter

Identify the measurement for the following:
4 points per answer

Small Hole Gages (6,7,8,9, or 10 Specify the number of the part you measured.)

A Part #

B Part #

C Part #

D Part #

E Part #

Identify the measurement for the following:
4 points per answer

Telescoping Gages

11.

12.

13.

14.

15.

Identify the measurement for the following:
4 points per answer

Adjustable Parallels

A

B

C

D

E

Step#	Location	Description
10	Instructor	Obtain a set of parts marked 3-D-1.
20	Tool cabinet	Select a steel rule, spring calipers, small hole gages, adjustable parallels, and telescoping gages.
30	Inspection area or classroom	Using spring calipers, measure the OD and ID of the parts numbered 1 through 5 to the nearest 1/64 of an inch (+/- 1/64) and record your answer in the space provided.
40	Inspection area or classroom	Using small hole gages, measure the parts numbered 6 through 10 to the nearest 0.001 of an inch (+/- 0.005) and record your answer in the space provided.
50	Inspection area or classroom	Using telescoping gages, measure the parts numbered 11 through 15 to the nearest 0.001 of an inch (+/- 0.005) and record your answer in the space provided.
60	Inspection area or classroom	Using adjustable parallels, measure the width of the slots in part 16 to the nearest 0.001 of an inch (+/- 0.005) and record your answers in the space provided.