Machine Shop Home  
  Introduction  |   Shop Safety  |   Layout  |   Inspection  |   Bench  |   Cutting Fluids  |   Sawing  |  Drilling

Drilling Machines - Project 6 - Angle Plate Part 1
Drilling Home

Part # PSG1#6

Part Description: Angle Plate 1

Quantity Req.: 1

Name _______________________ Date: _____________

PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED OPERATIONS.
Click here to view the part specification.
Step# Location  Description  Initials  Date
10 Instructor Obtain stock. *  
20 Bench  Deburr.  
30 Bench  Layout and center punch the location of the "F" drilled holes and the 9/32" holes.
40 Drill Press Center drill all hole locations.
50 Drill Press Drill "F" drilled holes.
60 Drill Press  Drill 9/32" holes.
70 Drill Press Chamfer "F" drilled holes.
80 Drill Press  Counterbore 9/32" holes to 13/32 for ¼" SHCS.
90 Bench Deburr and clean off the dye.
100 Bench Inspect the part and turn it in for grading. *