Machine Shop Home  
  Introduction  |   Shop Safety  |   Layout  |   Inspection  |   Bench  |   Cutting Fluids  |   Sawing  |  Drilling

Drilling Machines - Project 7 - Angle Plate Part 2
 Drilling Home

Part # PSG1#7

Part Description: Angle Plate 2

Quantity Req.: 1

Name _______________________ Date: _____________

PLEASE HAVE INSTRUCTOR INITIAL AND DATE  GREY BOXES (*), AFTER REQUIRED OPERATIONS
Click here to view the part specification.
Step# Location  Description  Initials  Date
10 Instructor Obtain stock. *  
20 Bench  Deburr.
30 Bench  Layout and center punch the location of the #7 drilled holes.
40 Drill Press Center drill all hole locations.
50 Drill Press Drill #7 holes.
60 Drill Press   Chamfer the drilled holes.
70 Drill Press Using a tapping attachment or drill press with reversing spindle, set up for tapping.
90 Drill Press Have your instructor check setup. *  
100 Drill Press Power tap the holes.
110 Bench Deburr and clean off dye.
120 Bench Inspect the part and turn it in for grading. *