 |
Machine
Shop 2 |
|
Machine
Shop 2 |
Lathe Operations
- Project 1-2
Straight Turning Between Centers
| Part # PSN1#2
Part Description: Draw Tube Quantity Req.: 1 |
Name _________________________
Date: ________________ |
PLEASE HAVE INSTRUCTOR INITIAL AND DATE GREY BOXES (*), AFTER REQUIRED
OPERATIONS
Click Here to view the Part
Specification
| Step# | Location | Description | Initials | Date |
| 10 | Instructor | Secure stock from instructor | * | |
| 20 | Lathe | Face one end to clean up center drill #5 center drill | ||
| 30 | Bench | Layout overall length | ||
| 40 | Lathe | Face to overall length & center drill | ||
| 50 | Lathe | Set up to turn between centers. Using a test bar check for taper. Adjust if necessary. | ||
| 60 | Lathe | Turn to 1.360 to 1.365 dia. | ||
| 70 | Lathe | File the .03 radius. Check with a radius gauge. | ||
| 80 | Bench | Clean, deburr and inspect | ||
| 90 | Instructor | Turn in for grading | * |