Machine Shop 2
 Lathe Operations - Project 1-4
Back to the Projects

Lathe Operations - Project 1-4
Straight Turning Between Centers
Part # PSN1#4

Part Description: Left Hand Thread

Quantity Req.: 1

 Name _________________________

Date: ________________

PLEASE HAVE INSTRUCTOR INITIAL AND DATE  GREY BOXES (*), AFTER REQUIRED OPERATIONS
Click Here to view the Part Specification 
Step# Location  Description  Initials  Date
10 Instructor Secure stock from instructor *  
20 Lathe  Face one end to clean up 
30 Lathe  Center drill with #4 center drill
40 Bench Layout overall length
50 Lathe Face to length & center drill
60 Lathe Set up lathe to turn part between centers
70 Lathe Turn 1.125 diameter to specification (if needed due to stock size)
80 Lathe Turn part around and turn diameter 1.125 (+.000 -.005) diameter to specification (if needed due to stock size)
90 Lathe Set up grooving tool for cutting thread relief groove.
100 Lathe Cut thread .
110 Lathe Set up lathe compound for cutting chamfers
120 Lathe Cut chamfers
130 Bench Deburr, clean and inspect part
140 Instructor Turn in for grading *